Fiber glass laid scrims for aluminum foil insulation laminated composites for outdoor sports

Fiberglass Laid Scrims Brief Introduction

Fiberglass Laid Scrims Characteristics

Fiberglass Laid Scrims Data Sheet

Fiberglass Laid Scrims Application

Primary Use: Reinforcement for Aluminum Foil Insulation Laminated Composites in Outdoor Sports Equipment

The core application of this fiberglass laid scrim is as the hidden “S” layer laminated into aluminum foil insulation composites​ used across the Outdoor Sports​ category — specifically sail laminates, table tennis rackets, kiteboards, and the sandwich technology of skis and snowboards. It is sandwiched into the composite stack (foil / scrim / non-woven / skin) to:

Add Dimensional Stability & Tear Resistance to Lightweight Sandwiches

Ski/snowboard and kiteboard cores are thin sandwich builds where any in-plane shear or impact can wrinkle the skin or delaminate the foil layer. The scrim’s multi-directional tensile and low elongation keep the foil–composite face flat and bonded through flex cycles, while adding negligible weight to the final gear.

Serve Sail & Racket Foil Laminates

In sail laminates and racket facings where aluminum foil or metallized films are part of the skin stack, the scrim acts as the tensile grid that prevents the foil from tearing under flutter, batten load, or string impact — extending gear life in outdoor cycling.

Enable High-Efficiency Laminating

10,000 m roll length (platform 50,000 m) feeds high-speed laminating and sandwich lines with fewer splice stops — higher yield per shift, more consistent batch appearance on finished composite sheets.

Secondary Applications

 a) Aluminum Foil Composite

b) PVC Flooring

c) None-woven category products reinforced

d) PVC Tarpaulin

Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.