Home
About Us
What’s Laid Scrims
Our Products
Laid Scrim
Fiberglass Laid Scrim
Polyester Laid Scrim
Composite Laid Scrim
Customized Laid Scrim
Reinforcement Solutions
Flooring Reinforcement
Waterproofing Reinforcement
Insulation Reinforcement
Carpet Reinforcement
Tape Reinforcement
Industrial Textile
Nonwoven Composites
Industrial Fabrics
PVC Coated Fabrics
Mesh Fabrics
Functional Textile Materials
FRP Materials
Adhesive&Fastening Materials
Polyester Netting
Polyester Tape
Surface Treatment & Protcetion Materials
Release Film
PET Release Film
BOPP Release Film
Surface Treatment & Reinforcement Materials
Carbon Tape
Chopped Strand
Top Tape
Carbon Surface Tissue
Fiberglass Surface Tissue
Ployester Surface Tissue
Fiberglass Surface Tissue
Axial Tape
GRE Release film(myler),GRP Release film(myler)
Fiberglass Laid Scrim Tape
Our Teams
News
Certificate
Contact Us
Featured
Home
News
News
Reinforcing Aluminum Foil Laminates: Where the Scrim Sits and What It Carries
Reinforcing Aluminum Foil Laminates: Where the Scrim Sits and What It Carries Aluminum foil is a remarkable barrier and a poor structural material. At the thicknesses used in insulation facings — a few microns, often quoted around 7 micron by facing manufacturers — it reflects radiant heat, ...
Read More
FSK Facing and FSK Tape: Matching the Laminate, Sealing the Seam, and Where Systems Fail
FSK Facing and FSK Tape: Matching the Laminate, Sealing the Seam, and Where Systems Fail Two rolls arrive on the same job site: a foil-scrim-kraft (FSK) faced insulation blanket, and a roll of FSK tape. They look unrelated — one wraps the duct, the other sits in the installer’s toolbox...
Read More
Where the Scrim Goes in Resilient Flooring: Rigid Cores (WPC/SPC), LVT Layers, and Paper-Composite Underlayment
Where the Scrim Goes in Resilient Flooring: Rigid Cores (WPC/SPC), LVT Layers, and Paper-Composite Underlayment Ask a flooring converter what scrim they use and you will usually get a mesh size and a grammage. Ask where it goes, and the answers start to diverge — because the same question ...
Read More
Mechanically Attached vs Adhered
Mechanically Attached vs Adhered Two roofs can be covered with the same TPO membrane — same polymer, same thickness, same reinforcement scrim — and yet put that scrim through two completely different working lives. The difference is not the membrane. It is how the membrane is held down. 0...
Read More
How to Read a Laid Scrim Spec Sheet: GSM, Mesh Pitch, Tensile and Elongation
How to Read a Laid Scrim Spec Sheet: GSM, Mesh Pitch, Tensile and Elongation Most laid scrim data sheets look disarmingly simple: a few item codes, a mesh size column, a weight column, maybe a roll width. Four columns, thirty seconds, done — you order the cheapest line that fits your grammage b...
Read More
Mechanically Attached vs Adhered: How the Attachment Mode Changes What the Scrim Carrier Does
Read More
Triaxial Laid Scrim: When a Biaxial Grid Is Not Enough
Triaxial Laid Scrim: When a Biaxial Grid Is Not Enough A biaxial laid scrim — two sets of yarns at 0° and 90° — is the default reinforcement for most laminating and coating lines. It is cheap, light, predictable, and for the majority of laminates it does its job quietly for the life of the p...
Read More
The Hidden Skeleton in Fire Protection Coatings: How Scrim Holds the Intumescent Char
The Hidden Skeleton in Fire Protection Coatings: How Scrim Holds the Intumescent Char A fresh overlay is the most visible promise in road maintenance: mill the old surface, lay new hot mix, and the road looks new again. The problem is that the old pavement underneath does not forget its cracks....
Read More
Asphalt Overlay Interlayers: Choosing Between Mat, Grid and Composite Systems
Asphalt Overlay Interlayers: Choosing Between Mat, Grid and Composite Systems Specifiers choose intumescent coatings for what happens at high temperature: at roughly 200-300°C, the additives in the film .decompose and the coating swells into a thick, porous, insulating char that slows heat reac...
Read More
Scrim Reinforcement for Carpet Backing: Layer Position and Selection by Carpet Type
Scrim Reinforcement for Carpet Backing: Layer Position and Selection by Carpet Type Why carpet backing fails without reinforcement A carpet is a laminate that gets abused in ways no other textile floor product has to survive: foot traffic in every direction, concentrated furniture loads, roll...
Read More
PVC Tarpaulin & Banner Reinforcement: Where a Laid Scrim Replaces a Woven Base Fabric
PVC Tarpaulin & Banner Reinforcement: Where a Laid Scrim Replaces a Woven Base Fabric Ask three tarpaulin suppliers what holds their product together and you will get the same answer: the base fabric. They are right — and they are describing one specific kind of base fabric. The PVC tarpaul...
Read More
FRP pipe surface mat veil release film filament winding surface treatment materials
The Surface System in Filament-Wound FRP Pipe: Release Film, Surface Veil and Laid Scrim On a continuous filament winding line, a pipe’s inner surface is settled in the first few metres of mandrel travel — before a single structural roving is laid down. Three materials decide it: the r...
Read More
1
2
3
4
5
6
Next >
>>
Page 1 / 35
WhatsApp Online Chat !