Light Weight Polyester PES Customized Mesh Laid Scrim for Adhesive Tape

Polyester Laid Scrims Brief Introduction

Polyester Laid Scrims Characteristics

Polyester Laid Scrims Data Sheet

Polyester Laid Scrims Application

Primary Use: Reinforcement for Lightweight Adhesive Tapes

The core application of this lightweight PES laid scrim (CP2.5×5 / CP2.5×10 / CP4×6 / CP8×12 series) is as the hidden tensile skeleton laminated between adhesive layers or embedded into the thin carrier​ of double-sided tape, foam tape, and die-cut PSA products. It is laminated into the tape stack to:

Control Elongation & Add Tear Resistance Without Bulking

The core application of this lightweight PES laid scrim (CP2.5×5 / CP2.5×10 / CP4×6 / CP8×12 series) is as the hidden tensile skeleton laminated between adhesive layers or embedded into the thin carrier​ of double-sided tape, foam tape, and die-cut PSA products. It is laminated into the tape stack to:

Enable Clean Die-Cutting & Coating Bite

The open, fine mesh allows the adhesive coating to key through evenly, and the scrim’s flexibility ensures smooth unwinding on PSA coating and slitting lines, with minimal adhesive oozing or liner wrinkling — useful for high-spec die-cut tapes.

Maintain Dimensional Stability in Service

The scrim’s low elongation prevents the tape from stretching when unrolled or loaded in shear, so die-cut shapes (logo tabs, mounting squares) stay in registered position after application.

Secondary Applications

 a) Aluminum Foil Composite

b) PVC Flooring

c) None-woven category products reinforced

d) PVC Tarpaulin

Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.