Non-woven laid scrims 3*3 ENDS-10MM (3.3×3.3 MM)

Non-woven laid scrims Introduction

Non-woven laid scrims Characteristics

Non-woven laid scrims Data Sheet

Non-woven laid scrims Application

Primary Use: Reinforcement for Thin-Substrate Laminates

The core application of this 3×3 ENDS (3.3×3.3 mm) fine-grid laid scrim is as the hidden tensile grid laminated into or between​ thin-host stacks — aluminum foil–kraft, thin non-woven, tissue, medical paper, and light technical textile laminates — where a coarser mesh would telegraph through the face or leave too-wide tear mouths. It is laminated into the host stack to:

Refined Tear Arrest on Thin Substrates

The core application of this 3×3 ENDS (3.3×3.3 mm) fine-grid laid scrim is as the hidden tensile grid laminated into or between​ thin-host stacks — aluminum foil–kraft, thin non-woven, tissue, medical paper, and light technical textile laminates — where a coarser mesh would telegraph through the face or leave too-wide tear mouths. It is laminated into the host stack to:

Support High-Speed Thin-Substrate Lines

The core application of this 3×3 ENDS (3.3×3.3 mm) fine-grid laid scrim is as the hidden tensile grid laminated into or between​ thin-host stacks — aluminum foil–kraft, thin non-woven, tissue, medical paper, and light technical textile laminates — where a coarser mesh would telegraph through the face or leave too-wide tear mouths. It is laminated into the host stack to:

Secondary Applications

 a) Aluminum Foil Composite

b) PVC Flooring

c) None-woven category products reinforced

d) PVC Tarpaulin

Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.