Non-woven Laid scrims for Building

Non-woven Laid scrims Introduction

This product is a Laid Scrim​ (glass, polyester, carbon, or hybrid) positioned as a multi-purpose reinforcement substrate for building-sector composites​ — including textile roofing shields, insulation facings, Alu–PE films, non-wovens, antistatic textiles, needle-punched non-wovens, pocket filters, tissues, and PVC flooring / carpet carriers. It is manufactured by chemically bonding continuous filament yarns (Glass, Polyester, Carbon, Cotton, Flax, Jute, Viscose, Kevlar, Nomex, etc.) into a flat-laid open mesh (square or tri-directional), then supplied as a standalone roll or pre-laminated carrier for integration into foil, non-woven, PVC, and technical textile stacks used onsite and offsite. Thanks to lightweight, high strength, low shrinkage / low elongation, and corrosion resistance, the scrim offers measurable value versus conventional reinforcement concepts, and bonds readily with many material systems common to building products.

Non-woven Laid scrims Characteristics

Non-woven Laid scrims Data Sheet

The regular supply of non-woven reinforcement and laminated scrim is 12.5×12.5mm,10x10mm,6.25×6.25mm, 5x5mm,12.5×6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.

Non-woven Laid scrims Application

Primary Use: Reinforcement Across Building-Sector Composites

The core positioning of this building-grade laid scrim is as the hidden tensile grid laminated into or between​ textile roofing shields, insulation facings, Alu–PE films, non-wovens, antistatic textiles, needle-punched non-wovens, pocket-filter media, tissues, and PVC flooring / carpet carriers. It is laminated into the host stack to:

Upgrade Mechanical Performance of Building Substrates

The scrim adds tensile & tear resistance at very low GSM, turning fragile or limp substrates (foil facings, thin non-wovens, needle-punched mats, PVC flooring layers) into composites that survive handling, converting, installation, and in-service loads (wind, thermal cycles, foot traffic).

Serve Multiple Building Sub-Segments from One Platform

Because the scrim is substrate-agnostic, the same roll can be specified into textile roofing shields, insulation & insulating material, Alu & PE films, non-wovens, antistatic textiles, needle-punched non-wovens, pocket filter, tissues, PVC flooring, carpet​ — an extensive field of applications that matches the building category’s breadth.

Keep Lamination Lines Efficient

10,000 m roll length (up to 50,000 m platform) feeds high-speed laminators, coaters, needle-punch lines, and slitters with fewer splice stops — fewer weak spots in finished rolls, better batch appearance for building-product mills.

Secondary Applications

a) Aluminum Foil Composite

b) PVC Flooring

c) None-woven category products reinforced

d) PVC Tarpaulin

Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.

The First and Biggest manufacturer and supplier of laid scrims in china!

Due to lightweight, high strength, low shrinkage/elongation, corrosion preventive, laid scrims offers tremendous value compared to conventional material concepts. And it’s easily to laminate with many kinds of materials, this makes it has an extensive fields of applications.