Non-woven Laid scrims for laminated material
Non-woven Laid scrims Introduction
This product is a Laid Scrim (glass, polyester, or hybrid) presented as a universal reinforcement substrate for laminating with other materials — thanks to its light weight, high strength, low shrinkage / low elongation, and corrosion resistance, it offers significant value compared with conventional reinforcement concepts. The scrim is manufactured by chemically bonding continuous filament yarns (Glass, Polyester, Carbon, Kevlar, Nomex, Cotton, Flax, Jute, Viscose, etc.) into a flat-laid open mesh (square or tri-directional), then supplied as a standalone roll or pre-laminated carrier for integration into foil, non-woven, PVC, paper, and technical textile stacks.
Non-woven Laid scrims Characteristics
Non-woven Laid scrims Data Sheet
|
Item No. |
CF12.5*12.5PH |
CF10*10PH |
CF6.25*6.25PH |
CF5*5PH |
|
Mesh Size |
12.5 x 12.5mm |
10 x 10mm |
6.25 x 6.25mm |
5 x 5mm |
|
Weight (g/m2) |
6.2-6.6g/m2 |
8-9g/m2 |
12-13.2g/m2 |
15.2-15.2g/m2 |
The regular supply of non-woven reinforcement and laminated scrim is 12.5×12.5mm,10x10mm,6.25×6.25mm, 5x5mm,12.5×6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.
Non-woven Laid scrims Application
Primary Use: Universal Reinforcement Substrate for Laminating with Other Materials
The core positioning of this laid scrim range is as the “hidden tensile grid” that can be laminated with foil, non-woven, PVC, paper, tissue, mat, and technical textile stacks — wherever a converter needs to add multi-directional tensile, tear resistance, and dimensional stability to a host substrate without bulking it up. It is laminated into the host stack to:
Upgrade Mechanical Performance of Host Substrate
The scrim adds tensile & tear resistance at very low GSM, turning a fragile or limp substrate (foil-kraft, thin non-woven, tissue, PVC film) into a composite that survives handling, converting, and in-service loads.
Keep Lamination Lines Efficient
10,000 m roll length feeds high-speed laminators, coaters, and slitters with fewer splice stops — directly supporting the page’s note that laid scrim “offers tremendous value compared to conventional material concepts” by lowering waste and improving roll appearance.
Serve as Platform Entry to Multiple End-Uses
Because the scrim itself is substrate-agnostic, the same roll can be specified into foil insulation, PVC tarpaulin, flooring, non-woven reinforcement, medical paper, and technical coated fabrics
Secondary Applications
a) Aluminum Foil Composite
b) PVC Flooring
c) None-woven category products reinforced
d) PVC Tarpaulin
The Professional manufacturer and supplier of laid scrims in China!
Laid scrims is the best material for laminating with many other kinds of materials, due to its light weight, high strength, low shrinkage/elongation, corrosion preventive, it offers tremendous value compared to conventional material concepts. This makes it has an extensive fields of applications.
The fields of applications:
Non-woven Laid scrims for laminated material Related Video: