Non-woven laid scrims laminated for Flooring Reinforcement Fabrics

Non-woven laid scrims Introduction

Non-woven laid scrims Characteristics

Non-woven laid scrims Data Sheet

Non-woven laid scrims Application

Primary Use: Reinforcement for Flooring Composites (PVC Flooring + Carpet)

The core application of this flooring-grade laid scrim is as the reinforcement layer laminated into​ the site’s Flooring category stacks — PVC Sheet Floor, PVC Roller Floor, and Carpet​ carriers. It is laminated into the host stack to:

Prevent Joint Separation & Bulge / Stabilize Carpet Tiles

In PVC flooring, the scrim’s low elongation restrains differential movement between adjacent pieces caused by thermal expansion and contraction, avoiding joint gaps or surface bulging. In carpet carriers, the same scrim adds tensile and tear resistance to the non-woven/backing stack so carpet tiles and rolls survive handling, cutting, and foot-traffic shear.

Improve Throughput on Flooring & Carpet Lines

50,000 m roll length feeds high-speed calender/extrusion/laminating lines with fewer splice stops — higher yield per shift, more consistent batch appearance on finished flooring rolls/sheets and carpet backs.

Secondary Applications

 a) Aluminum Foil Composite

b) PVC Flooring

c) None-woven category products reinforced

d) PVC Tarpaulin

Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.