Non-woven laid scrims laminated with fabric for first aid bag for reinforcement solutions

Non-woven laid scrims Brief Introduction

Non-woven laid scrims Characteristics

Non-woven laid scrims Data Sheet

The regular supply of non-woven reinforcement and laminated scrim is 12.5×12.5mm,10x10mm,6.25×6.25mm, 5x5mm,12.5×6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.

Non-woven laid scrims Application

Primary Use: Reinforcement for First Aid Bag Fabric Composites

The core application of this fabric-laminated laid scrim is as the hidden tensile grid laminated between or onto​ the outer fabric and lining of first aid bags, trauma kits, EMS pouches, and vehicle/military medical packs. It is laminated into the fabric stack to:

Prevent Tear at Zippers, Corners & Handle Mounts

First-aid bags see rough handling — dropped from ambulance shelves, dragged across trunk floors, overstuffed during restock. The scrim adds multi-directional tensile and tear resistance at very low GSM, reinforcing the fabric–lining sandwich without bulking the shell or stiffening the fold zones.

Maintain Shell Dimensional Stability Under Load

The scrim’s low elongation keeps the bag shell flat through cutting, folding, and filling cycles, preserving print/logo registration and zipper alignment — useful for branded first-aid kits and EMT pouches where appearance and function both matter.

Enable Clean Fabric Laminating

With compatible binders (PVOH, hot-melt acrylic, etc.), the scrim feeds thermal-bonding and laminating lines without gumming or liner wrinkling — compatible with polyester/nylon oxford + non-woven lining stacks common to medical-bag converters.

Secondary Applications

 a) Aluminum Foil Composite

b) PVC Flooring

c) None-woven category products reinforced

d) PVC Tarpaulin

Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.