Polyester mesh Laid Scrims for medical Scrim Absorbent Towel

Polyester mesh Laid Scrims Introduction

Polyester mesh Laid Scrims Characteristics

Polyester mesh Laid Scrims Application

Primary Use: Reinforcement for Medical Scrim Absorbent Towels

Prevent Disintegration When Saturated

Absorbent towels must pull blood, exudate, saline, or disinfectant while staying intact through gloved handling, folding, and repetitive wiping. The scrim arrests tear propagation so the towel does not lint, split, or fall apart when fully loaded — critical for OR and procedure trays.

Add Handling Toughness Without Sacrificing Softness

With PVOH or hot-melt binders, the scrim is compatible with thermal laminating and folding lines used in medical towel converting — allowing the reinforced towel to be folded, stacked, and sealed into sterile packs or dispenser boxes without adhesive oozing or ply separation.

Enable Folding, Sterile Packaging & Converting Compatibility

The open mesh adds multi-directional tensile with minimal mass, so the towel stays flexible and skin-friendly while gaining meaningful resistance to thumb-press tearing or edge-fray during use — useful for patient-care wipes and bib/drape towels.

Secondary Applications

Due to its versatile reinforcement properties and open mesh design, this polyester laid scrim is also extensively applied in other industrial sectors per the product page:

Aluminum Foil Composite

Non-woven laid scrim is widely applied in the aluminium foil industry; roll lengths up to 10,000 m help manufacturers improve production efficiency, and the finished product gets better appearance.

PVC Flooring

PVC flooring is mainly made of PVC plus other necessary chemical materials via calendering or extrusion, divided into sheet and roller types. All major domestic and foreign manufacturers now apply laid scrim as the reinforcement layer to avoid joint separation or bulging between floor pieces caused by thermal expansion and contraction.