Fiberglass non-woven laid scrims 0.8*0.8 ENDS-10MM 12.5×12.5 MM

Fiberglass non-woven laid scrims Brief Introduction

Fiberglass non-woven laid scrims Characteristics

Fiberglass non-woven laid scrims Data Sheet

Fiberglass non-woven laid scrims Application

Primary Use: General-Purpose Reinforcement Substrate for Non-Woven & Laminated Stacks

The core application of this 0.8×0.8 ENDS (12.5×12.5 mm) laid scrim is as the hidden tensile grid laminated into or between​ foil–kraft, non-woven mats, PVC carriers, and technical textile stacks where a converter needs multi-directional tensile, tear resistance, and dimensional stability without bulking the substrate. It is laminated into the host stack to upgrade mechanical performance at very low GSM, turning fragile or limp substrates into composites that survive handling, converting, and in-service loads.

Secondary Applications

 a) Aluminum Foil Composite

b) PVC Flooring

c) None-woven category products reinforced

d) PVC Tarpaulin

Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.