SCRIM REINFORCED NONWOVEN CM3*10PH for Composite Flooring and TPO Applications，34 TEX Glass, SBR Adhesive

SCRIM REINFORCED NONWOVEN

SCRIM REINFORCED NONWOVEN Characteristics

SCRIM REINFORCED Data Sheet

The regular supply of non-woven reinforcement and laminated scrim is 12.5×12.5mm,10x10mm,6.25×6.25mm, 5x5mm,12.5×6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.

SCRIM REINFORCED Application

Primary Use: Reinforcement for Composite Flooring & TPO Membrane Substrates

The core application of this scrim-reinforced nonwoven CM3 * 10PH is as the dual-layer reinforcement mat laminated into or behind​ the wear/print layer of composite flooring​ (PVC sheet/roller flooring) and TPO roofing membranes. It is integrated into the product stack to:

Stabilize PVC Flooring Against Thermal Expansion

In PVC composite flooring, the mat’s low-elongation glass scrim restrains differential movement between floor pieces caused by heat expansion/contraction, avoiding joint separation or surface bulging that compromises appearance and function. The SBR bond keeps the non-woven and scrim united through calender/extrusion.

Reinforce TPO Membranes for Roofing Loads

In TPO roofing, the mat adds multi-directional tensile and tear resistance under wind uplift, foot traffic, and thermal cycling, while the non-woven face improves polymer adhesion and provides a uniform backing that resists wrinkling during membrane laying.

Bridge Polymer–Substrate Interface

Because the composite is optimized for PVC and TPO matrices, it bridges the interface between the polymer top layer and any substrate or backing, reducing delamination risk in both flooring and roofing systems.

Secondary Applications

 a) Aluminum Foil Composite

b) PVC Flooring

c) None-woven category products reinforced

d) PVC Tarpaulin

Laid scrim can be used as basic materials to produce truck cover,light awning, banner, sail cloth etc.

Due to lightweight, high strength, low shrinkage/elongation, corrosion preventive, laid scrims offers tremendous value compared to conventional material concepts. And it’s easily to laminate with many kinds of materials, this makes it has an extensive fields of applications.

The SCRIM REINFORCED NON-WOVEN CM3*10PH is a high-quality non-woven scrim designed for reinforcing composite flooring and TPO membranes. Manufactured using 34 TEX fiberglass yarns and bonded with SBR adhesive, this scrim provides exceptional strength and stability, ensuring the durability and performance of the end product. This versatile material is ideal for various industrial applications, offering enhanced load-bearing capacity and dimensional stability.